How to rip Blu-ray movies to Apple TV on Mac?
Are you still frustrated to look for a practical Blu-ray ripper for your Apple TV on sorts of search engines? In fact, there are numerous different Blu-ray rippers in the market, but unfortunately, not all of them are easy-to-use and powerful while ripping BD movies to do other use, especially for people who are using Mac OS. To relieve the troubles of Mac users, this thread will present you how to rip Blu-ray movies to Apple TV via the available software Pavtube Blu-Ray Ripper for Mac in detail. Just check its step-by-step instruction as below freely.
Click here to download Pavtube Blu-Ray Ripper for Mac, then install and run it.
Step 1: Load BD files, select Apple TV format and specify save path
You can press tag "DVD Folder" or "IFO Folder" to input Blu-ray files. If you like, you can tick checkbox before "Merge into one file" to combine all the .m2ts files into one file. Also, you are allowed to specify a path to store the output files for your Apple TV through clicking "Browse" button; otherwise, this program will export the output files to a destination folder set by default automatically. No matter you use your indicated path or defaulted path, you can finally get the ripped files via hit "Open" button.
Do remember clicking the drop-down list of "Format" to select an Apple TV workable format. Once you click this button, you can do your selection from the following interface:
Step 2: Adjust video and audio parameters
Suppose you need change some video and audio parameters to manage the output file size and quality, you can totally achieve it by clicking "Settings" button. All the parameters in the following panel can be adjusted as you like.
Step 3: Convert
After the above settings are done, what you should do next is just hitting "Convert" button to start BD ripping for your Apple TV. Conversion interface is as below, you can get ripping info from it as much as possible, such as the ripping progress, elapsed and left conversion time, generated and estimated file size, so that you can know accurately about the time expenditure and space occupation.
See, only three simple steps, you can finish ripping your BD movies to your Apple TV successfully. Why not have a try about Pavtube Blu-Ray Ripper for Mac?
Tips:
1. This program also supports editing DVD and Blu-Ray clips. It provides editing functions like trimming video duration, cropping video area, adding watermark, adjusting special effect, replacing audio, and more.
2. It adopts advanced audio and video sync tech which enables you to have a high quality output video without any audio/video out of sync problems.
3. This program has its own built-in codec, so it will not install any codec to your computer, which avoids the unexpected codec problem.
4. Pavtube Blu-Ray Ripper for Mac is at super high ripping speed. Its advanced coding technology quickens the conversion speed. With this Mac Blu-Ray Ripper, you can convert DVD, Blu-Rays 1.5 or 2 times faster than other similar tools.
Posted at 08:00AM Mar 16, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
How to rip Blu-ray files for playback on iPhone 3GS via Mac OS?
As a matter of fact, Blu-ray rippers specially developed for Windows operating system are much more than the applications designed for Mac OS, thus Mac users often feel troublesome to search for such a program, especially for one that is easy-to-use and practical, to deal with their tons of Blu-ray collections, not to mention how to add these BD files into portable devices for playback. Fortunately, a powerful utility called Pavtube Blu-ray Ripper is released recently in purpose of relieving Mac users trouble. It is capable of ripping BD files into many other common video formats, such as AVI, MP4, WMV, MKV, MOV, FLV, SWF, RM, 3GP, AAC, AC3, MP3, OGG, WAV, WMA, M4A, etc., so that you can do whatever you like with the ripped files, adding to media player for local playback, importing to iMovie, Final Cut Pro for further editing, sync to iPhone 3GS for entertainment, or do something else at will. Now I am going to focus on one aspect only, and will be glad to show you how to use this application to rip Blu-ray files for playback on iPhone 3GS via Mac OS.
Step 1: Load BD files
There are two ways to do it, namely, through "DVD Folder" and "IFO File".
Step 2: Choose a format for iPhone 3GS
Click the drop-down list of "Format", and then click the option "iPhone", after that select an output format according to the specification of your iPhone 3GS. All are as the following interface showing, and here I choose "iPhone 3G H.264 640x480(*.mp4)" for instance.
Step 3: Set destination folder
Click "Browse" button to decide where to load the output files for your iPhone 3GS. If not, Pavtube Blu-ray Ripper will export the ripped Blu-ray files to a save path set by default automatically.
Step 4: Adjust video and audio parameters
This program allows users resetting video and audio options like codec, aspect ratio, bit rate, frame rate, etc., in that case, you can take charge of the output file size and image quality in a proper way.
Step 5: Start Blu-ray ripping
Once the above steps are completed, then you can click "Convert" button to begin ripping your BD files. After finished, the generated files for iPhone 3GS can be found by clicking "Open" button with ease.
Additional tips for Pavtube Blu-ray Ripper:
1. Tick the checkbox "Merge into one file", you can combine all the Blu-ray files to be as a single file, so as to enjoy them on your iPhone 3GS without intervals.
2. Pavtube Blu-ray Ripper adopts advanced audio and video sync tech, which enables you to have high output quality without any audio/video out of sync problems.
3. It enables users to select subtitle, audio track as well as camera angle.
4. It provides users with simple editing functions, such as crop, trim, add watermark, add special effects, take place of the original audio, etc.
5. The multithread technology makes it 1.5 or 2 times faster than other similar tools.
6. Besides ripping BD files into other media formats, it also supports directly copying Blu-rays and general DVDs to the hard drive of your Mac.
Posted at 07:57AM Mar 16, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
How to back up Blu-ray and standard DVD movies to your hard drive
Until now, all my three TV cabinets have been full filled with a large number of DVD and Blu-ray discs. I believe it is time to digitize them and back up some of them to the hard drive of my PC, and others to a large
capacity external hard drive, so as to manage all the movies in a tidy and orderly way.
I just did a simple search for a blu-ray ripper and reviews on Google, and found the Pavtube Blu-Ray Ripper. Almost every guide or website review either rated Pavtube as the No.1 ripper or as being highly
recommended. I also read some user reviews from different websites that convinced me to download the trial version of this application. It worked perfectly on both standard DVD and Blu-ray conversion. Best of
all, I was able to open, copy, and watch every?Blu-ray movie, irrespectively whether the Blu-ray was bought in Japan, Europe, or USA. Share this utility here, and hope this helps.
You can free download Pavtube Blu-Ray Ripper here.
How-To:
1. Run Pavtube Blu-Ray Ripper and click "DVD Rom", "DVD Folder" or "IFO/ISO" to load DVD and Blu-ray movies. Generally speaking, the file with the longest duration time would be the main movie, if you just
need back up the main movie, tick off this one only.
Each file will be checked by default after imported, right click on any one of the files, and then there will be a popup window to let you uncheck all, just do it, and afterwards to tick off the checkbox before the file
you need converted.
2. Click on the drop-down menus after "Subtitle" and "Audio" respectively to select your required languages and sound effect.
3. Select output format and specify save path
Click on the pull down list of "Format" to select output format and click on the folder icon at the opposite side of "Output" to specify destination folder.
To backup your DVD and Blu-ray movies without any quality loss, you can choose "Copy"-"Directly Copy", this will retain the output files in the original .vob and .m2ts format.
If youd like to convert them to other video formats, then you can choose one according to your needs.
4. Click on "Settings" button to do advanced settings
The popup window will allow you to adjust audio and video parameters including codec, bit rate, aspect ratio, frame rate, sample rate, and audio channels, 5.1 surround sound is supported as well.
5. Click on "Convert" button to begin backing up your DVD and Blu-ray movies
Once finished, you can find out the output files via clicking on "Open" button with ease.
Posted at 06:13PM Mar 11, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
Convert DVD to good quality MPG or VOB
I have been looking for a program to help me convert some of my DVD movies to MPG or VOB formats with good output quality, so that I can make use of them to do other use. After spending an entire weekend Google-ing the Web and trying different packages I decided to purchase Pavtube Blu-Ray Video Converter Ultimate, since it works with not only DVDs, but also Blu-ray discs and almost all video files, which provides one-stop service and versatile functionalities. The most important thing is that it works well, without audio and video out of sync issues and guarantees an excellent output quality to meet my needs. Suppose you are having the same requirements like me, please find the step-by-step instruction I shared as below:
BTW, you can free download Pavtube Blu-Ray Video Converter Ultimate here.
Step 1: Launch this program, and click "Load DVD" to add DVD files.
This program will tick all the imported files by default, but generally, the one with the longest duration time would be the main movie, so you can right click on the file to uncheck all, and then tick off this one.
Step 2: Select your needed subtitle and audio track
This program is capable of recognizing all the subtitle and audio track information, which enables you to select your desired languages to convert.
Step 3: Select MPG or VOB as output format
Click on the drop-down menu of "Format", and then the output formats profile will pop up. To output MPG format, there are "Common Video" and "HD Video" to choose from. Id like to output good quality files, so I select "HD Video"-"MPEG-S HD Video (*.mpg)" as an example.
There are also vob formats customized for different regions. Notice that NTSC is a video format used in North America, Central America, Japan, and parts of South America; PAL is the video format used in Europe, Africa, the Middle East, most of Asia, and parts of South America; SECAM is used in Africa, Asia, Pacific Islands, Former USSR, and Americas. You should select one according to your geographical regions.
Step 4: Click "Settings" button to adjust audio and video parameters
You are allowed to adjust codec name, aspect ratio, bit rate, frame rate, sample rate, and audio channels to customize the file quality and file size.
Step 5: Click "Convert" button to start ripping DVD to MPG or VOB
Once finished, you can get the output files via clicking on "Open" button with ease.
Additional tips:
How to adjust Brightness, Contrast, and do Deinterlacing
One more reason I prefer to this DVD to MPG or VOB converter is that I also love the way to make the video quality brighter or darker and adjust the contrast and do deinterlacing. Go to "Edit" icon, and then the following editor window will show off. Hit on "Effect" button firstly, and then drag the slider bars under "Brightness", "Contrast", and "Saturation" to do adjustment. Meanwhile, you can click on the pull down menu of "Effect" to add special effects to your videos, and tick off the checkbox "Deinterlaing" to remove the obvious lines that go across the image.
Posted at 06:09PM Mar 11, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
How to convert TiVo files to MOV, MPEG, AVI, MP4, FLV, WMV, and VOB on Mac
As we all know there is no certain software developed for Mac users to transfer and replay TiVo DVR recorded files as "TiVo Desktop" doing on Windows. But if you want to do format conversion between TiVo file
and other video formats on your Mac directly, what is your method? My way is to use Pavtube Video Converter for Mac to achieve my goal. Once you are sure you have the same requirement as I do, follow these
steps to find the solution.
Requirements:
- TiVo recordings: they can be from your own TiVo DVR or from the DVR of your friends
- TiVo Media Access Key: it is a specific 10-digit number assigned to every TiVo account holder. If your TiVo source file are from your friends, then ask him/her for it.
- Pavtube Video Converter for Mac
Step 1: Launch Pavtube Video Converter for Mac and click "Add" button to load TiVo files
In the first attempt, a dialog window will pop up as below, just click "OK" button.
After that, the following window will allow you to enter your Media Access Key, just insert it, and click "OK" button to confirm. What you should do next is clicking on "Add" button to load your TiVo files again. Or
you can directly drag and drop the file into this program. Meanwhile, suppose you want to let it alone and do something else during the conversion, you can tick "Shut down the computer after conversion".
Step 2: Select output format
Click on the drop-down list of "Format" to select output format. This utility supports a wide range of output format, including MOV, MPEG, AVI, MP4, FLV, WMV, VOB, and customized formats for iPod, iPhone,
PSP, PS3, Apple TV, BlackBerry, etc.
Step 3: Do advanced settings
Click on "Settings" button to adjust audio and video parameters like codec, aspect ratio, bit rate, frame rate, sample rate, and audio channels. If you are not good at this step, you can totally skip it. By the way, if
you wanna combine multiple files to be as a single file, you can tick the checkbox "Merge into one file" in the main interface.
Step 4: Click "Convert" button to start conversion
Once finished, you can get the output files via clicking on "Open" button with ease.
Posted at 07:47PM Mar 09, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
Remove BD+ protections from Blu-ray movies on Mac
BD+ is a technology used to prevent unauthorized copies of Blu-ray discs and the playback of Blu-ray media using unauthorized devices, which is more powerful than the former AACS protections. This article
aims to provide a solution for removing BD+ protections from your Blu-ray movies. Follow this way, and then you can take full advantage of your own purchased BD movies in your own ways.
Required software:
Pavtube Blu-Ray Ripper for Mac
Pavtube Blu-ray Ripper for Mac is a powerful tool specially designed for Mac users to rip, convert, backup and edit both Blu-ray and DVD movies. The source file could be from Blu-ray disc, DVD, Blu-ray and
DVD folder, ISO and IFO image file. The ripper is capable of decrypting region codes, and almost all copy protections, including AACS, BD+. Besides backup movies to hard drive, it also supports output other
popular audio and video formats to playback on your beloved portable devices such as iPod, iPhone, Zune, Blackberry, PSP, Creative Zen, Xbox 360, Apple TV etc.
Well, following is the solution:
1. Download and install Pavtube Blu-Ray Ripper for Mac, after that, launch this program and click "DVD Folder" or "IFO File" to load BD movies into this program.
2. If you just want to rip the main movie, you can tick the file with the longest duration time only. Afterwards, click on the pull down menu of "Subtitle" and "Audio" to select your wanted language. The preview
window is able to show the effect of your dynamic switching on subtitle and audio track in real time.
3. Click the drop-down list of "Format" to select output format, and if you want to retain the original quality to full extent regardless of the output format, you can choose "Copy", and then "Directly Copy".
4. Click "Settings" button to adjust audio and video parameters like codec, aspect ratio, bit rate, frame rate, sample rate, and audio channels.
5. Click "Convert" button to start BD ripping and BD+ copy protection removing. As long as the ripping work is finished, you can click "Open" button to get the output files which are in your desired format and
without neither AACS nor BD+ copy protection.
Additional Tips:
Generally, Blu-ray media has a large file size because of its high definition quality, so the ripping time will be longer than that of standard DVDs. To avoid waiting around, you can click "Option" button to tick off
the checkbox "Shut down the computer after conversion". Do remember clicking on "OK" button to save your settings.
If you are a Windows user, you can free download this Blu-ray ripper to remove BD+ protections on your PC.
Posted at 07:42PM Mar 09, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
The best free Hulu Downloader you've ever seen
Hulu Downloader Beta is a practical Windows application to help you capture Flash videos (.flv, .f4v), Movies, TV Shows, Movie Trailers, MTV, etc. from video sharing websites like Hulu.com, Youtube.com, Google
video, Myspace, Yahoo! Video, CBS, MTV, Megavideo, Photobucket, Dailymotion, Veoh, Demand Five, etc., and save them on your hard drive, play them back whenever you want without being connected to the
Internet.
It is capable of downloading movies quickly and flawlessly, so as to enrich your movie collections with the most popular online video resources.
Features Highlights:
Widely support for
overwhelming online videos
The app is able to browse and download
video clips from video hosting websites of HTTP, PTMP, PTMPT, PTMPE, PTMPTE
protocol, and these cover overwhelming majority of websites such as Hulu,
Veoh,
Boxee, Joost, YouTube, Yahoo Video etc.
Capture URL automatically
The URL of any video clip that
is playing will be auto-captured and listed out for your convenience, and you
can download it with one click or just ignore it. There is no need to add URL
manually.
Enrich your A/V collection
This Hulu Downloader is
capable of downloading any video and audio file you can play online so that you
can turn numerous online video and audio into your own collection. Whats more,
a powerful player is
inlaid for you to play back the videos in library freely.
Convert downloaded videos freely (come up soon with full
version)
You are allowed to convert the downloaded videos to various
video and audio formats compatible with portable devices like iPod, iPhone, 3G
phone, etc. With this app, you can enjoy the online flash videos on
your portable players freely, whenever and wherever.
Free download Hulu Downloader Beta:
http://download.huludownload.com/hulu-downloader/huludownloader_setup.exe
Posted at 07:39PM Mar 09, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
Reserve TrueHD audio and DTS-HD Master Audio of BD .m2ts streams on Mac
Lots of people are still looking for solutions to figure out how to reserve Dolby TrueHD audio of Blu-ray .m2ts streams while doing format conversion. Without a practical program, its definitely difficult to set the
movies being converted in your master language, even though your .m2ts files are not copy-protected. Normally, if your master language is English, then English audio is making use of TrueHD, and suppose
your format conversion application can not recognize TureHD audio, then it will only output the audio track it recognized, that would be French, Spanish, or some other languages instead of English. In that case,
you will encounter language troubles absolutely, so an available MTS/M2TS converter which can support TrueHD audio would provide timely help at this time.
Besides keeping Dolby TrueHD audio, some people also have the requirements of keeping DTS-HD Mater Audio during the conversion. There is no doubt that everyone needs great audio to match their great
video. To relieve the pains of Mac users, this guide will take TrueHD audio for example to show you how to retain your needed audio track of BD .m2ts files on Mac in detail.
Required software:
Pavtube MTS/M2TS Converter for Mac
Okay, lets begin now.
Step 1: Click "Add" button to load .m2ts files
Step 2: Click "Properties" to select TrueHD audio
Firstly, click the drop-down list of "Stream ID", after that a list of audio tracks will show up like "0x1100", at the same time, the audio codec name will pop up in the textbox of "Format", if it is TrueHD, the codec
name "truehd" will emerge like the following interface showing. What you should do is just clicking on the stream ID one by one to see which one is your wanted TrueHD audio.
Step 3: Select output format and set destination folder
Click the drop-down list of "Format" to select whatever format you like as output format, and click "Browse" button to specify where to store the output files. Meanwhile, if you want to combine multiple .m2ts files to
be as a single file, you can tick the checkbox "Merge into one file".
Step 4: Set advanced settings
Click "Settings" button, and you are allowed to adjust audio and video parameters like codec name, aspect ratio, bit rate, frame rate, sample rate, and audio channels in the following interface, to reserve TureHD
audio to the full extent, you should select 6 channels.
Step 5: Click "Convert" button to begin conversion
After conversion is completed, the output files can be found out via clicking "Open" button with ease.
By the way, if you do not have decrypted BD .m2ts streams, but copy-protected Blu-ray discs, then Pavtube Blu-ray Ripper for Mac is your appropriate choice,
it is capable of dealing with both Dolby TrueHD audio and DTS-HD Master Audio as well as let audio and video match well.
Posted at 07:36PM Mar 09, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
How to enjoy DVD and Blu-ray movie clips on ARCHOS 7
ARCHOS 7 impresses us with a variety of excellent features including full web browsing, full email application, Web TV and Web Radio, Widgets application, TV recording, content playback and Web surfing on TV, as well as watching Flash web-videos full screen, playing videos, music, photos, games, and content streaming from your PC. The video experience is great with this 800 pixel-wide resolution and 7" screen.
While the technical specifications unveils that neither VOB nor M2TS format are incompatible with the smart phone. So if you want to enjoy DVD and Blu-ray movie clips on ARCHOS 7, you need a Blu-ray/DVD ripper to help you do format conversion.
First off, let us have a look at ARCHOS 7 supported files:
Video playback:
MPEG-4 (ASP@L5 AVI, up to DVD resolution)
WMV (MP@ML, up to DVD resolution) including WMV protected files
M-JPEG (Motion JPEG Video) in QVGA resolution
With optional plug-in (downloadable from your tablet on www.archos.com):
HD support: MPEG-4 (ASP 720p) & WMV HD (MP 720p)
H.264 up to DVD resolution with AAC
MPEG-2 MP@ML up to 10 Mbps (up to DVD resolution) and AC3 stereo sound (5.1)
Audio playback:
Stereo MP3 decoding @ 30-320 Kbits/s CBR & VBR, WMA, Protected WMA, WMA pro 5.1, WAV (PCM/ADPCM)
AC3 stereo audio and 5.1 sound files (via SPDIF output of DVR Station)
Flac and OGG Vorbis audio files
With optional software plug-ins (downloadable from your tablet on www.archos.com):
AAC, AAC+ stereo audio files
The following contents will share you a solution to remove the copy protections of DVD and Blu-ray movies, as well as rip them to video clips suitable for ARCHOS 7.
Required software:
Pavtube Blu-Ray Ripper: It is capable of ripping both Blu-ray disc and standard DVDs. The most important thing is that it allows you to select subtitle and audio track of any language of the movie, as well as ensure audio video in sync. Now find a step-by-step instruction below:
Step 1: Launch Pavtube Blu-Ray ripper and import Blu-ray/DVD files to it
There are three ways to load Blu-ray and DVD files: through "DVD Rom", "DVD Folder" and "IFO/ISO".
Step 2: Select output format for ARCHOS 7
Click on the dropdown list of "Format", and then follow "Archos" "Archos 5/7 WMV Video (*.wmv)", also, you can choose the .avi format customized for Archos.
Step 3: Set advanced settings
Click on "Settings" button, and then the following interface will show up, you can adjust all the audio and video parameters on it. Generally, the default settings can basically satisfy your ARCHOS 7.
Step 4: Start ripping
Click on "Convert" button to start ripping. You can view the progress info on the ripping window, and you can choose "Shut down computer after conversion" to avoid waiting around. After conversion is completed, the output files are ready to be played on your ARCHOS 7.
Blu-Ray Ripper is your best choice
Posted at 05:37AM Mar 03, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
How to get MKV files imported to Windows Movie Maker
I wanna make an animate music video, but my Windows Movie Maker only accepts a few types of video files, it is bad that my source file MKV is out of the supported range. This is a troublesome problem, I just want to know if there is an easy way to convert my MKV files to AVI so I can import and use them and not have to re-download the entire anime. After searching online and reading some software reviews, and trying out a large number of video converters, I end up with one called Pavtube MKV Converter, which is user friendly, reliable and stable. Best of all, it is able to ensure HD output and audio/video in sync. Share it here, hope this helps.
My MKV is in HD quality, so my requirement is keeping HD as well, following is my process of using this MKV Converter to realize my goal. Definitely simple steps:
1. Click "Add" button to import MKV files into this program
2. Click the drop-down list of "Format" to select AVI as output format for Windows Movie Maker
To keep HD quality, I selected "AVI HD Video (*.avi)" as output format.
3. Click "Settings" button to adjust audio and video parameters
This program allows users to customize audio and video parameters. Codec, aspect ratio, bit rate, frame rate, sample rate, and audio channel are all changeable in the following window.
4. Click "Convert" button to start converting MKV to AVI
As long as the conversion is finished, you can get the output files via clicking on "Open" button, and WMM will recognize them without trouble.
Posted at 05:34AM Mar 03, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
How to convert MKV files to WMV for Xbox 360
I have some MKV anime files that I want to play them on my Xbox 360, but every time I try, my console does not work at all. Then a friend of mine told me to convert them to WMV with a video converter called Pavtube MKV Converter, I tried the trial version, and asked their support team what are the best settings for my Xbox 360, they gave my following suggestions:
Xbox 360 supports the following for WMV:
Video Profiles: WMV7 (WMV1), WMV8 (WMV2), WMV9 (WMV3), VC-1 (WVC1 or WMVA) in simple, main, and advanced up to Level 3
Video Bitrate: 15 Mbps with resolutions of 1920 x 1080 at 30fps.
Audio Profiles: WMA7/8, WMA 9 Pro (stereo and 5.1), WMA lossless
Audio Max Bitrate: No restrictions.
I followed these settings, and the output files actually worked on my console, and the trial version just has Pavtube logo stands in the center of the image. I think it is well worth buying. I would like to share its detailed operating steps here, hope it will be of some help for you guys who are having headaches about this issue.
Following is its intuitive UI, and only within several steps the conversion will be finished flawlessly.
Step 1: Click "Add" button to load MKV files
Step 2: Click the pull down menu of "Format" to select output format for Xbox 360
Step 3: Click "Settings" button to set optimal settings
I just do the settings as their support team suggested:
Size: 1920*1080
Video bit rate: 1500kbs
Frame rate: 30 fps
Others I use the defaults
Step 4: Click "Convert" button to start conversion
This converter not only has fast conversion speed, but also lets audio and videos match very well. Im satisfied with it.
Step 5: Click "Open" button to get the output WMV files
Once conversion is completed, you can get the converted WMV files for your Xbox 360 via hitting "Open" button with ease.
An easy and reliable application, hope it helps.
Posted at 05:29AM Mar 03, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
Convert M2TS files to AVI for Corel Ulead DVD MovieFactory 6 Plus
Even though it is announced that Corel Ulead DVD MovieFactory 6 Plus software has added
AVCHD camcorder support and users can import and edit high definition footage from AVCHD camcorder discs, and convert to standard definition formats, but I still met troubles while importing the HD .m2ts files captured by means of a HD Sony Handycam type HDR-CX11E (PAL), I guess it is not as powerful as it claims.
I have to look around for a practical and affordable program to help me out. My only objective is to convert these .m2ts files to .avi files, so that I can edit them with Corel Ulead DVD MovieFactory 6 Plus, and burn them into a SD DVD for playback on the DVD player connected to my TV, as well as computer DVD Player software on computers. Fortunately, I came across Pavtube HD Video Converter, it is easy to use and helpful, I finally successfully converted .m2ts files to .avi format, and the output files are in good quality, without any problems while editing in MovieFactory 6 Plus. It is my pleasure to share this HD Video Converter here. Following is the detailed steps, absolutely easy enough:
1. Click "Add" button to load .m2ts files to this application
2. Select AVI as output format and specify destination folder
Click the drop-down menu of "Format" to select AVI format for Corel Ulead DVD MovieFactory 6 Plus. Meanwhile click the folder icon at the end of "Output" to specify where to locate the output AVI files. By the way, if you wanna combine multiple .m2ts files into a single file, you can tick the checkbox "Merge into one file".
There are "Common Video" and "HD Video", both have AVI options, you can choose one according to your own needs.
Common AVI:
HD AVI:
3. Set advanced settings
Click "Settings" button, then the following window will enables you to adjust all video and audio parameters on it, including codec, aspect ratio, bit rate, frame rate, sample rate, and audio channel. That means you can customize the settings in your own ways.
4. Click "Convert" button to start conversion
Once finished, you can get the output AVI files via clicking on "Open" button. After that, Corel Ulead DVD MovieFactory 6 Plus will be able to recognize these files. You can now edit the files and author them to a new DVD.
Posted at 05:26AM Mar 03, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
Solutions to keep TrueHD audio and DTS-HD Master Audio of Blu-ray .m2ts files
If you have tons of .m2ts streams from your Blu-ray discs, which are copyright protections removed, and want to convert them to other video formats and keep TrueHD audio or DTS-HD Mater Audio of the original files, and then whats your idea to realize this goal? Actually, I know some of you do not have any idea about this, because its not an easy thing to get a program to recognize the two special soundtracks at all.
Fortunately, Pavtube Studio has upgraded its MTS/M2TS Converter recently, which has added supportS to both Dolby TrueHD audio and DTS-HD Master Audio, is able to convert M2TS files to whatever formats you need, such as MP4 format supported by iPod, iPhone, PSP, PS3, Apple TV, Gphone, Blackberry, etc., 3GP format supported by most cell phones, FLV format which is suitable for online transferring, MPEG-4 format which is workable for importing to iMovie and Final Cut, and many other video formats like AVI, MPG, MOV, MKV, VOB and so on.
The following part will take reserving Dolby TrueHD audio for instance, and will show you how to keep your wanted audio track while doing format conversion.
A step-by-step instruction will be starting in the following part, which will take reserving Dolby TrueHD audio for instance. If you want to follow this guide to have a try, you can download Pavtube MTS/M2TS Converter here.
Step 1: Click "Add" button to load .m2ts streams
Step 2: Click "Properties" to select TrueHD audio
Click the drop-down list of "Stream ID", and there are several options, select each one to see which one is TrueHD audio, if it is, "truehd" will pop up in the textbox of "Format", just like the following window showing. Do remember clicking "OK" button to save your selections.
Step 3: Select output format and specify save path
Click the drop-down list of "Format" to select your wanted output format, and click the folder icon at the opposite side of "Output" to specify where to locate the output file. Moreover, if you have the needs of combining multiple .m2ts files into a single file, you can tick the checkbox "Merge into one file".
Step 4: Set advanced settings
Click "Settings" button, and you are allowed to adjust audio and video parameters like codec, bit rate, frame rate, sample rate, and audio channel in the following interface, to reserve TureHD audio to the full extent, you should set soundtrack as 5.1 channels.
Step 5: Click "Convert" button to start conversion
More related features of Pavtube MTS/M2TS Converter
1. Fast conversion, excellent output quality, and perfect audio and video synchronization.
2. Convert, compress and edit videos from Blu-ray DVDs or HD camcorders.
3. Trim, crop, add special effects and different watermarks
4. Support VFW codec encoding and 5.1 channel audio output.
5. Enjoy the output videos online, on portable devices, or backup on computer.
Posted at 05:23AM Mar 03, 2010 Read More... by zhangweijunsir4 in General | Comments[1]
Fast way to rip DVD to MP4 for Zune
There are a lot of DVD ripper tools for Zune on the internet and most of them are claimed to be the fastest and best one. You maybe do not know how to make a choice among so many DVD to Zune converters, please focus here- Pavtube DVD to Zune Converter which is a real fast DVD Zune ripper for converting DVD to Zune movies and playback on your Zune. Just follow these easy steps to accomplish this conversion in a few seconds.
Please ensure that you downloaded and installed this program, if not, please click here.
1: Run this program, and you will see this main interface.
2: Import DVD files into this program.
You can add DVD
videos from the DVD disc or DVD folder with IFO and VOB files by clicking any
button of DVD Rom, DVD Folder or
IFO File.
3: Set output format, location
Select the output format
you need from the drop-down menu of Format. Specify the
output path by clicking the folder
button.
.
Here I choose format [.* mp4].
4: Set advanced settings
You can change the settings
like video codec, bit rate, video size, audio codec sample rate, etc by clicking
button Settings.
5: Edit
Click Edit button and you can
adjust video effects like brightness, contrast, audio, volume and so on; you can
also trim the video clips, cut off the black edges by clicking buttons
Trim and Crop. Through these ways, you can better the output
profile quality.
6: Start conversion
After all necessary settings are
ready; select the files you want to convert, and then click the button
Convert to start conversion.
Only need a few seconds, the speed is beyond your imagination. You can hit the button Open to find your converted profiles and transfer them into your Zune.
Posted at 02:48AM Feb 03, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
How to extract MP3, WMA from Blu-Ray Disc?
Have you noticed that Blu-Ray disc is a new resource for your MP3 player? Just image yourself create a unique collection of fantastic music from your Blu-Ray discs! Each episode is your favorite! Is it possible? Yes, with Pavtube Blu-Ray Ripper you can manage that! Pavtube Blu-Ray Ripper can act like a Blu-Ray to MP3 converter and extract audio files from Blu-ray disks or common Blu-Ray discs. You can easily extract a certain beautiful section of music or dialog from your Blu-Ray disc video file and save them as MP3 or WMA files. Now, you can listen to your fantastic blu-ray movies anytime anywhere.
You can find below a step-by-step guide for directly convert Blu-Ray to
MP3/WMA:
Step 1. Click "DVD ROM"
button to add Blu-Ray disc, or click "DVD Folder" button to add
Blu-Ray files from your computer. Pavtube Blu-Ray Ripper supports batch
conversion so just select all your favored chapters from the file list.
Step 2. Set output format from the
Format bar. Click on the bar and choose Common
Audio, select MP3 or WMA from submenu. Move your mouse to the output
path bar and specify an output folder as you like.
Step 3. Convert Blu-Ray to MP3/ WMA.
Click on the "Convert" button and Pavtube Blu-Ray Ripper will
extract audio from Blu-Ray files and output them to MP3/ WMA. If you would like
to combine all the selected chapters into one file, simply check Merge
into one box.
If you are interested in this program, please click here to download Pavtube Blu-Ray Ripper for free trail.
Posted at 02:45AM Feb 03, 2010 Read More... by zhangweijunsir4 in General | Comments[0]
